YUANEANG ABS Filament 1.75mm — 10-Color Engineering Bundle
Product description
Complete ten-color ABS engineering collection — 1 kg per spool: The set contains ten full-size 1 kg reels of ABS filament in Black, White, Gray, Red, Blue, Gold, Purple, Orange, Green and Brown. Each spool is 1.75 mm diameter, ready for FDM machines.
Material and mechanical qualities: This is ABS thermoplastic formulated for toughness, impact resistance and dimensional strength. It’s intended for functional components such as brackets, housings, mechanical assemblies, frames and replacement parts that need to withstand stress and handling.
Thermal behavior and warping control: ABS offers higher heat tolerance and stability compared with PLA. These spools are produced to reduce curling and shrinkage on larger builds, improving dimensional accuracy for engineering prints. Using an enclosure and appropriate bed/nozzle settings further minimizes deformation.
Surface finish and post-processing: Prints come out with a matte, low-gloss surface that sands, paints and smooths well. The filament supports common post-processing workflows used in prototyping and finishing, including sanding and painting for cosmetic or functional refinement.
Compatibility and suggested print settings: Designed for most 1.75 mm FDM printers (examples include Prusa, Creality/Ender series, Anycubic, Bambu Lab, Elegoo, Sovol and similar machines). Typical settings are 230–250°C nozzle temperature and 80–110°C bed temperature; an enclosed build space is recommended for best outcomes on larger or taller parts.
Pros
- Ten 1 kg spools in diverse colors
- Strong, impact-resistant prints for functional parts
- Matte surface that sands and paints well
Cons
- Performs best with an enclosure
- Requires careful temp tuning for long prints
- Some users report mixed results with solvent smoothing
VerdictThis bundle delivers ten 1 kg spools of 1.75 mm ABS suited for mechanical parts, housings and multicolor prototyping. It prints with good toughness and thermal stability, and the surface takes standard finishing well. Expect better results with a heated bed and enclosure; tune nozzle and chamber temps for long prints. A solid option for workshops and educational use when you need multiple colors a
Reviews
-
Jesse 5/5
Clean white prints straight away
Printed right out of the package with smooth walls, even layers and minimal stringing. The white came out uniform on larger surfaces and stuck to the bed reliably. I'll buy this white again.
-
K. Bell 1/5
No acetone smoothing and surface defects
Acetone vapor had no effect after many hours, and prints showed tiny blisters despite drying and nozzle changes. Not suitable if you need dependable acetone finishing.
-
Keith Leslie 3/5
Great colors and overall value
The color selection is excellent and the filament performs well. A fantastic option if you need a variety of ABS hues.
-
Vikkitoria 5/5
User-friendly filament
Solid product that prints reliably and is easy to work with.
-
mchipguru 5/5
Smooth results with default ABS profile
Printed cleanly on H2D using the default Bambu Lab ABS settings. Good bed and layer adhesion, smooth finish.
-
Eric 4/5
Easy printing, some doubts about composition
Simple to print and finished pieces look good. I marked one star down because the advised temps are lower than typical ABS, so I wonder about true heat resistance. It feels a bit softer than expected.
-
Forrest Barton 5/5
Strong ABS but needs temp tweaks
Prints are solid and the colors are attractive. I had to lower chamber and nozzle temps a few degrees compared with my usual ABS settings for longer jobs, but the parts ended up very sturdy.
-
Jason 5/5
Printing lots for a project — impressed
Needed a big supply for a full-size build and this delivered consistent results on my Voron using my ABS profile. Plenty of filament and reliable prints for large projects.
Comments
No comments yet.
Sign in or sign up to comment.