Compatible Continuous Label Rolls for Brother QL Printers — 2.4in x 100ft (10)
Product description
Specification: Each pack contains 10 continuous label rolls, each measuring 2.4 inches (62 mm) wide by 100 feet (30.48 m) long — replacement for DK-2205 style continuous label material.
Compatibility: Designed to work with a wide range of Brother QL thermal label printers, including QL-500, QL-550, QL-570, QL-580N, QL-650TD, QL-700, QL-710W, QL-720NW, QL-800, QL-810N, QL-820NWB, QL-1050, QL-1060N, QL-1100, and QL-1110NWB.
Pre-installed refillable holder: Each roll is delivered already mounted on a refillable plastic core so you can drop it into the printer quickly. The holder reduces wrinkling, misalignment and feeding problems, and makes roll changes fast and intuitive.
Customizable length and uses: With a continuous 100 ft length and 2.4 in width you can print and cut labels to any length required — ideal for barcodes, return addresses, FNSKU, price tags, shipping labels, envelopes, parcels, mailings, signage and temporary name badges.
Adhesive performance: The adhesive is formulated to remain effective across a wide temperature range (14°F to 158°F / −10°C to 70°C), offering strong tack to help prevent labels from peeling during handling and transit.
Print durability: The thermal label surface is designed for clear, high-contrast printing and dependable barcode readability with resistance to fading and smearing so carriers can scan through delivery.
Support: The brand provides customer support through message, email, phone and remote desktop assistance for setup or troubleshooting questions.
Pros
- Good bulk value and long continuous length
- Pre-mounted refillable cores for easy loading
- Heat-resistant, strong adhesive and clear printing
Cons
- Occasional roll winding or feeding defects reported
- Slightly different finish and thickness vs OEM
- Some rolls may be less tacky than brand originals
VerdictThese 10 rolls deliver excellent value for bulk label needs and work well with most Brother QL series printers. The preinstalled refillable holders simplify loading and help prevent misfeeds, while the potent, temperature-resistant adhesive keeps labels stuck through transit. Print clarity is good for barcodes and addresses, though a small portion of users report occasional feeding or winding defe
Reviews
-
Alyssa Drost 5/5
Great value and simple to install
These are a much cheaper alternative and very easy to load. No compatibility problems, prints are crisp, adhesive holds well, and each roll lasts a long time. The 10-pack is a solid bargain—I'd buy again.
-
Carmelo 5/5
All good
Everything works great.
-
Jenni 5/5
Perfect fit
Fits my printer perfectly and the labels are good quality.
-
Jarelis 5/5
Better than expected
Outperformed the original in some ways — excellent print clarity and tack. Easy to peel from the backing and worked fine in my Brother printer. Happy with the purchase.
-
dlo 5/5
Good quality and easy peeling
High quality labels that ran smoothly in my QL-1100. Easier to peel than the original rolls.
-
cesaroalo 5/5
Consistent quality, repeat buyer
Good quality at a fair price. I’ve purchased these multiple times.
-
Manny S 5/5
Sharp printing and strong adhesive
Replaced DK-2205 with these and they print cleanly for price tags. No feeding or alignment problems on my QL printer, and the glue sticks reliably to multiple surfaces. Good performance for the price.
-
Sarah 5/5
Great fit and savings
Worked flawlessly in my Brother machine and cost much less than the name brand. Recommend for budget-conscious users.
-
W. Tiu 4/5
Good deal but not flawless
Mostly reliable and great value for a school, but one roll arrived wound backwards and a few stopped feeding near the end. Reseating sometimes fixes it, so be aware of possible defects.
-
me 1/5
Faint printing and feeding error — workaround
Initial prints were very light and I began getting frequent feed errors. Seller refused replacement. I found the rolls were wound too tightly; gently unspooling and rewrapping fixed feeding, though the print stayed faint. Not likely to reorder.
-
David Loper 5/5
Not premium but good value
A bit thinner than OEM and slightly less tacky, with a semi-gloss finish instead of matte. The frame feels flimsy but works. Print quality is comparable and overall it’s a cost-effective alternative.
-
Volkan 1/5
Avoid — severe feeding problems
Rolls arrive wound so tightly the printer reports a feed error and can’t pull them. Also the adhesive isn’t very sticky after peeling. I don’t recommend these.
Comments
No comments yet.
Sign in or sign up to comment.